ADORE. One Drop Gel, 30 g, #06, Rose water. Builder gel, milky with pink undertone

Gel for nail extensions in a jar with a vacuum pump one Drop Gel №06 - milky with a pink undertone

one Drop Gel - medium-thick camouflage gel for extensions, strengthening and correction of nail architecture for medium and longer-than-medium lengths.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ comfortable medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dispensing system: one press = one drop. The drop volume is adjusted by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you must remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration/dehydrating: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish shade appears on the nail plate surface
3. Bonding: when using adhesive base PRO BASE-BOND, skip this step
4. Base coat: apply an even layer of base coating PRO BASE-BOND, carefully sealing the side walls and the free edge. Polymerize the base coating in a UV lamp for 2-3 min, in an LED lamp for 60 seconds.
5. Strengthening: with a gel brush, apply a scrubbing layer of gel over the entire nail plate, leaving a margin of 1 mm from the cuticle. Over the uncured gel, apply a second leveling layer, following the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 min, in an LED lamp for 90 seconds.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. Using a 150/180 grit file, perform step-by-step shaping.

PRO tips:
- to facilitate material placement, you can use upper forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare/place forms on each finger one by one. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, and then model the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp until full polymerization of the gel for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. Using a 150/180 file, perform step-by-step shaping.

PRO tip: apply the gel leaving at least a 1mm margin from the cuticle to avoid lifting of the material in this area

Brand: ADORE 
Volume: 30 g