ADORE. One Drop Gel, 30 g, #04, Muted rose. Gel for nail extension, light nude

Gel for nail extension in a jar with a vacuum pump one Drop Gel #04 - light nude

one Drop Gel - medium-density camouflage gel for extension, strengthening, and correction of nail architecture for medium and above-medium length nails.

Used for:
- extension on top and bottom forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-density consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial nail, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The volume of the drop is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before first use, you need to remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: degrease the nail plate mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe).
2. Dehydration: apply NAIL FRESHER to the entire nail, allow it to air dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: if using adhesive base PRO BASE-BOND, skip this step.
4. Base layer: apply an even priming layer of base coat PRO BASE-BOND, carefully treating the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 minutes, in an LED lamp for 60 seconds.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate, leaving at least 1 mm from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 minutes, in an LED lamp - 90 seconds.
Remove the tacky layer with PREP&FINISH and a lint-free wipe. Use a 150/180 grit file to perform step-by-step filing of the shape.

PRO tips:
- to make material application easier, you can use top forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.

Extension: prepare/install forms on each finger in turn. Place a thin base of the desired length and shape directly on the bottom or top form, then model the nail architecture with gel over it. To create an arch, you can press the gel at the 7-12 second mark, depending on the type and power of the lamp. Then place the nail in the lamp until the gel fully polymerizes: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the tacky layer with PREP&FINISH and a lint-free wipe. Use a 150/180 file to perform step-by-step filing of the shape.

PRO tip: apply gel leaving a minimum of 1 mm from the cuticle to avoid lifting of the material in this area.

Brand: ADORE
Volume: 30 g