ADORE. One Drop Gel, 30 g, #05, Soft almond. Builder gel, milky peach

Builder gel for nail extensions in a jar with a vacuum pump one Drop Gel №05 - milky peach

one Drop Gel - medium-thick camouflage gel for extensions, strengthening and correction of the nail architecture for medium and above medium length nails.

Used for:
- extensions on top and bottom forms
- strengthening and correction of the nail architecture as a mono-product and in combined techniques in combination with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the pressure force on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: do a manicure, shape the free edge of the nail as desired.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it dry in the air until a whitish shade appears on the nail plate
3. Bonding: when using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply an even primer layer of PRO BASE-BOND base coat, carefully treating the side walls and the free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire nail plate, leaving a gap of at least 1mm from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with solid materials. Cure in a UV lamp for 2-4 min, in an LED lamp - 90 sec.
Remove the sticky layer with PREP&FINISH and a lint-free wipe. File with a 150/180 grit nail file to shape step by step.

PRO tips:
- to facilitate material application, you can use top forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare / place forms on each finger one by one. Apply a thin substrate of the desired length and shape directly onto the bottom or top form, and model the nail architecture with the gel over it. To create an arch, you can pinch the gel at 7-12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp until the gel is fully cured: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the sticky layer with PREP&FINISH and a lint-free wipe. File with a 150/180 grit nail file to shape step by step.

PRO tip: apply the gel with a gap of at least 1mm from the cuticle to avoid lifting of the material in this area

Brand: ADORE
Volume: 30 g