ADORE. One Drop Gel, 30 g, #05, Soft almond. Builder gel, milky peach

Builder gel in a jar with a vacuum pump one Drop Gel #05 - milky peach

one Drop Gel - medium-thick camouflage builder gel for nail extension, strengthening, and correction of nail architecture for medium to medium-long nails.

Used for:
- extension on top and bottom forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
Main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from the natural nail to the artificial one, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is regulated by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before first use, you need to remove the transparent protective silicone cap from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (using a buffer) and chemically (using PREP&FINISH and a lint-free wipe) degrease the NP
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the NP surface
3. Bonding: when using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply a priming, even layer of the base coat PRO BASE-BOND, carefully sealing the side walls and free edge. Polymerize the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: using a gel brush, apply a rubbing layer of gel over the entire NP surface, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Polymerize in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the residual stickiness with PREP&FINISH and a lint-free wipe. Use a 150/180 grit nail file to perform a step-by-step shaping of the form.

PRO tips:
- to facilitate material application, you can use top forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extension: prepare / install forms one by one on each finger. Apply a thin base of the desired length and shape directly onto the bottom or top form, then model the nail architecture with the gel. To create an arch, you can pinch the gel for 7-12 seconds, depending on the type and power of the lamp. Then place the nail in the lamp for complete polymerization of the gel for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual stickiness with PREP&FINISH and a lint-free wipe. Use a 150/180 nail file to perform a step-by-step shaping of the form.

PRO tip: apply the gel with a minimum 1mm gap from the cuticle to avoid material lifting in this area

Brand: ADORE 
Volume: 30 g