ADORE. One Drop Gel, 30 g, #03, Melted caramel. Builder gel, peach-pink

Builder gel in a jar with a vacuum pump one Drop Gel No. 03 - peachy pink

one Drop Gel is a medium-thick camouflage builder gel for extension, strengthening, and correction of nail architecture for medium and above medium length.

Used for:
- extension on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dispensing system: one press = one drop. The drop volume is adjusted by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Consistency: medium.
Pigmentation: medium.

! Please note that before use, you need to remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, shape the free edge of the nail as desired.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish shade appears on the nail plate surface
3. Bonding: if using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply a uniform primer layer of PRO BASE-BOND base coat, carefully coating the side walls and free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: with a gel brush, apply a rub-in layer of gel over the entire nail plate surface, leaving a 1mm gap from the cuticle. On the uncured gel, apply a second leveling layer, following the basic principles of sculpting with hard materials. Cure in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the residual tackiness with PREP&FINISH and a lint-free wipe. Using a 150/180 grit nail file, perform step-by-step filing of the shape.

PRO tips:
- to facilitate material application, you can use upper forms or gel nail tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2 mm.

Extension: prepare / place forms on each finger one by one. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, then sculpt the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the lamp type and power. Then place the nail in the lamp until the gel is fully cured: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual tackiness with PREP&FINISH and a lint-free wipe. Using a 150/180 grit nail file, perform step-by-step filing of the shape.

PRO tip: apply the gel with a minimum 1mm gap from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g