ADORE. One Drop Gel, 30 g, #07, Satin skin. Builder gel, light beige

Builder gel in a jar with vacuum pump one Drop Gel №07 - light beige

one Drop Gel - medium-thick camouflage builder gel for extensions, strengthening, and correction of nail architecture for medium and above-medium lengths.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage - excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dispensing system: one press = one drop. Drop volume is regulated by the pressure on the pump.

Hardness: high.
Viscosity: medium.
Plasticity: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, you need to remove the transparent protective silicone cap from the pump !

Application technology:
0. Prepare the nail plate: perform a manicure, give the desired shape to the free edge of the nail.
1. Degreasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate.
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air dry until a whitish tint appears on the surface of the nail plate.
3. Bonding: when using the adhesive base PRO BASE-BOND, skip this step.
4. Base coat: apply an even primer layer of PRO BASE-BOND base coat, carefully treating the side walls and free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: with a gel brush, apply a rubbing layer of gel over the entire surface of the nail plate, leaving a 1mm gap from the cuticle. Over the uncured gel, apply a second leveling layer, considering the basic principles of modeling with hard materials. Cure in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. File the shape step by step with a 150/180 grit file.

PRO tips:
- to facilitate material placement, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from the inside by 1-2mm.

Extensions: prepare / set the forms one by one on each finger. Lay a thin base of the desired length and shape directly on the lower or upper form, then model the nail architecture with gel. To create an arch, you can press the gel at 7-12 seconds, depending on the type and power of the lamp. Then send the nail into the lamp for full polymerization of the gel for 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove residual tackiness with PREP&FINISH and a lint-free wipe. File the shape step by step with a 150/180 grit file.

PRO tip: apply gel with a minimum 1mm gap from the cuticle to avoid lifting of the material in this area

Brand: ADORE
Volume: 30 g