ADORE. One Drop Gel, 30 g, #02, Ballerina pink. Builder gel, light pink

Nail extension gel in a jar with vacuum pump one Drop Gel №02 - light pink

one Drop Gel - medium-thick camouflage gel for extensions, strengthening and correction of nail architecture of medium and above medium length.

Used for:
- extensions on upper and lower forms
- strengthening and correction of nail architecture as a mono-product and in combined techniques in combination with harder polymer materials

Advantages of one Drop Gel:
+ convenient medium-thick consistency
+ cold polymerization
+ natural shades
The main advantage is excellent self-leveling.

The gel has medium pigmentation, the natural shade of the gel camouflages the transition from natural nail to artificial, adapting to the color of the nail plate.
Convenient to use and store thanks to the vacuum dosing system: one press = one drop. The drop volume is adjusted by the force of pressing the pump.

Hardness: high.
Viscosity: medium.
Flexibility: low.
Density: medium.
Pigmentation: medium.

! Please note that before use, the transparent protective silicone cap must be removed from the pump !

Application technique:
0. Prepare the nail plate: perform a manicure, shape the free edge of the nail.
1. De-greasing: mechanically (with a buffer) and chemically (with PREP&FINISH and a lint-free wipe) degrease the nail plate
2. Dehydration: apply NAIL FRESHER to the entire nail, let it air-dry until a whitish tint appears on the nail plate surface
3. Bonding: when using the adhesive base PRO BASE-BOND, skip this step
4. Base layer: apply an even primer layer of PRO BASE-BOND base coat, carefully treating the sidewalls and free edge. Cure the base coat in a UV lamp for 2-3 min, in an LED lamp for 60 sec.
5. Strengthening: with a gel brush, apply a rubbing-in layer of gel over the entire nail plate surface with a 1mm distance from the cuticle. Over the uncured gel, apply a second leveling layer, following the basic principles of modeling with solid materials. Cure in a UV lamp for 2-4 min, in an LED lamp for 90 sec.
Remove the residual sticky layer with PREP&FINISH and a lint-free wipe. With a 150/180 grit nail file, perform step-by-step shape filing.

PRO tips:
- to facilitate material application, you can use upper forms or gel tips
- to prevent lifting from the free edge, we recommend filing the natural nail from inside by 1-2mm.

Extensions: prepare / place forms one by one on each finger. Apply a thin substrate of the desired length and shape directly onto the lower or upper form, then model the nail architecture with gel. To create an arch, you can pinch the gel at 7-12 seconds, depending on the lamp type and power. Then place the nail in the lamp until the gel is fully cured: 60 seconds in an LED lamp, 3-4 minutes in a UV lamp.
Remove the residual sticky layer with PREP&FINISH and a lint-free wipe. With a 150/180 grit nail file, perform step-by-step shape filing.

PRO tip: apply gel with at least 1mm distance from the cuticle to avoid material lifting in this area

Brand: ADORE
Volume: 30 g