You Are Cute. Bottle Gel #04, 5 ml, liquid gel

LIQUID GEL BOTTEL GEL — an innovative material for strengthening, leveling, and nail extension. This is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace the base.

Features:

• Wavelength for polymerization: 365–405 nm.
• UV/LED lamp power: 36–48 W.
• Allowable coating thickness: 0.5 mm at the free edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally warmed to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. We do not file the nail shape, or we leave 2 mm of length to be removed after leveling.
3. With a 220 grit file, lightly buff the nail from above without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. We do two passes. Use 4 wipes for this (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange wood stick, place a wipe on it, and wipe everything in the cuticle area and nail folds.
7. Primer is used optionally, but if the underlay base has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Movements should be rubbing. We paint all the nail folds and cure in the lamp for 60 seconds.
9. Wipe off the tacky layer.
10. Leveling. If leveling with gel, leave a 0.5–1 mm margin from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file out 1 mm of the natural nail from the underside. In this case there will be no material separation. If the material is hard and the nail is very soft, the nail itself will start separating from the hard material at the free edge.
13. After filing, wipe off the tacky layer and apply gel polish.
14. Apply top coat. Cure 120 seconds. After curing, do not wipe with anything, as the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine