HEYLOVE. Frame builder Gel, BLUSH, 30 ml. Universal builder gel

Updated and improved formula FRAME GEL – a modeling gel of medium creamy consistency, presented in 13 new shades.

Blush — warm pink shade.

The material spreads easily, self-levels, and helps form a smooth, even surface with minimal filing. Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort for the master.

Please note! The difference between the two palettes lies in the application technique. Since FRAME GEL is used for strengthening/coating and extension, the color saturation effect will differ.

1. On nail tips with stickers – strengthening effect.

2. On impressions of top forms – extension effect.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of lifting near the cuticle;
• In a 1 mm layer, hard with some cushioning - holds shape, resistant to chipping;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/reel/DZZy1VhI5p1/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA==

Characteristics:

• Heating during polymerization is moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For modeling top and bottom forms;
• Shape restoration, strengthening;
• Reconstruction using the 'sidewall' technique;
• Extension without filing;

1. Prepare the nail plate mechanically (nail file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it in a top form or on a bottom form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary
9. Finish the manicure by applying top coat, cure for 1–2 minutes

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [*/•): CI 77499, CI 77891, CI 77491

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp turned away from the master. If you hold the turned-on lamp with the light facing the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!