Cart is empty
HEYLOVE. Tint base, CLOUDS, 15 ml, tint base
We pack and quote today
We pack tomorrow
We accept orders until 15:00 Kyiv time, Mon–Fri
Shipping is not in the price
We weigh your packed parcel and send you a photo on the scales together with the carrier's quote. Don't like it — cancel free of charge.
Worldwide, usually ~7 days
Tracking number the moment we ship. Europe — daily private couriers (PL, DE, IT, ES, FR, CH).
Pay from any country
Cards, PayPal, Apple Pay, Revolut, Paysend, Western Union, SWIFT
PayPal
Revolut
PayPal
Revolut
A manager, not a robot
WhatsApp / Telegram / Viber +380 93 595 4926
Description
Due to its dense pigmentation and elasticity, the CLOUDS tint base creates a perfectly even coating after just one coat.
Shade: pastel cool pink
Collection: SUNSET
Video: https://www.instagram.com/reel/DObOFRPCGNz/?igsh=MXNocmR1MTVuYjJ6cw==
Consistency: medium
Hardness/elasticity: elastic
Acidity: neutral, pH=6.7
Scent: neutral
Pigmentation: dense, covers the free edge
Application:
-
Thoroughly degrease the nail plate using phBond dehydrator.
- Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely.
-
Apply a layer of clear Rubber base as a base coat and cure for 30 seconds.
-
Apply one or two coats of Tint base. Curing time in UV/LED lamp: 60 seconds.
-
As the final coat, apply top coat.
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, Cl 77742, CI 77289, CI 77499, CI 77891, CI 7700
Warning! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp facing away from the master. If you hold the lamp on with the light facing the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on density (viscosity).
This is simply a law of physics, nothing else.
For example, in water, bubbles last very briefly and escape on their own.
If we take denser liquids (honey, thick builder gel, etc.) - bubbles readily settle in these products and do not leave them as quickly as water.
The same goes for base. If you work carelessly with the brush, sharply dipping it into the bottle, it involuntarily acts as a blender, mixing the material with air, forming bubbles. This is especially true for materials in bottles with a brush.
Therefore, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We consciously chose a medium consistency because it has advantages:
- the material does not run, does not leak;
- contours are clear without extra effort;
- the master calmly lays the architecture and has time to check it by the reflection;
- there is no need to apply a second coat to refine the architecture or camouflage the free edge.
At our production facility, there is equipment that prevents the formation of bubbles in the material at all stages – from mixing pigment to pouring into bottles.
We also warn our partners that we are against a store consultant opening the bottle for a client and showing the material. Because a consultant who is not a master does not understand that the brush can create bubbles without even realizing it.
Not to mention that the necks of bottles look unaesthetic when they are soiled with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the cap of the bottle, but do not remove the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
By the law of physics, in a warm environment molecules move faster, and this speeds up the process.
Air will rise to the surface; it is lighter than the liquid.
Specifications
BrandHEYLOVE
Product typeColor rubber / camouflage base
Volume15
CollectionSunset Collection
Country of originUkraine
ColorsNude / beige / brown
PropertyOpaque
Documents
Reviews 4
5,0