You Are Cute. Bottle Gel #04, 15 ml, liquid gel

LIQUID GEL BOTTEL GEL is an innovative material for strengthening, leveling, and extending nails. It is a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coatings. Such a gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Permissible coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, has medium consistency.
• Has medium pigmentation, covers the free edge.
• Full polymerization occurs in 120 seconds.
• Suitable only for nail strengthening and extension.
• Has good shock absorption.
• When strengthening with this gel, the natural nail must be filed.
• Requires a Rubber Base underlayer.
• It can be additionally heated to make the gel thinner.

Application method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which will be removed after leveling.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Perform a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep. Do two approaches. Use 4 wipes (1 wipe for 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it, and wipe everything in the cuticle area and in the sinuses.
7. Use primer if desired, but if the base for the underlayer has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlayer with a flat gel brush. Movements should be rubbing. Paint all sinuses of the nail and cure in the lamp for 60 seconds.
9. Wipe off the stickiness.
10. Level. If leveling with gel, make a 0.5–1 mm indent from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the stickiness and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as shine may be lost.

TPO FREE

Volume: 15 ml

Brand: You Are Cute

Country: Ukraine