HEYLOVE. Frame builder Gel, O2 (Oxygen), 30 ml, universal builder gel, sky blue ("oxygen")

FRAME gel - universal builder gel in 13 shades

Packaged in a jar with a pump for gel dispensing.

O2 (oxygen formula) - sky blue.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for sculpting, correction, strengthening, and extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick layer it holds the arch and does not deform;
• creates a durable coating resistant to chipping;

How to use:

1. Buff the nail plate with a 180 grit nail file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the sidewalls.
3. Apply dehydrator and wait 30 seconds for it to evaporate moisture.
4. Apply a primer layer of Rubber base with rubbing motions and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel as an architectural layer or place it into an upper form or onto a lower form (depending on the technique)
7. Cure each nail for 30 seconds, then at the end place both hands again for 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform surface filing if necessary.
9. Apply No Sticky or Dark Story top coat and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Warning! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp facing away from the technician. If the lamp is on and facing the technician, unwanted polymerization of the material on brushes and the necks of open bottles may occur.

Note: all documents are in the attached files!