HEYLOVE. Frame builder Gel, WHITE FRENCH, 30 ml, universal builder gel, white

FRAME gel - a universal builder gel in 13 shades

Packaged in a jar with a pump for dispensing the gel.

WHITE FRENCH - milky white.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for modeling, correction, strengthening, and filing-free extensions;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick layer holds the arch and does not deform;
• creates a strong coating resistant to chipping;

How to use:

1. Buff the nail plate with a 180 grit nail file, or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side folds.
3. Apply dehydrator and wait 30 seconds for the moisture to evaporate.
4. Apply a primer layer of Rubber base with rubbing motions and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or sculpt using an upper form or a lower form (depending on technique)
7. Cure each nail for 30 seconds, then at the end cure both hands again for 1-2 minutes.
8. Remove the tacky layer from the Frame gel and perform surface filing if needed.
9. Apply No Sticky or Dark Story top coat and cure for 1-2 min.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially direct sunlight). Also, please note that even on cloudy days, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to begin polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp facing away from the technician. If the switched-on lamp is held with the light facing the technician, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.

Note: all documents are in the attached files!