HEYLOVE. Frame builder Gel with Pump, CRYSTALLINE, (clear), 30 ml, universal builder gel with pump, transparent

FRAME gel - universal builder gel in 13 shades.
Packed in a jar with a pump for dispensing the gel.

CRYSTALLINE - transparent.

Video (material overview and packaging instructions) at link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, but in a thick layer it holds the arch and does not deform;
• creates a durable coating resistant to chips;

1. Sanding the plate with a 180 grit file or a 100 grit buffer.
2. Wipe with a degreaser to remove dust, especially under the cuticle and in the side sinuses.
3. Apply a dehydrator and wait 30 seconds for it to evaporate moisture.
4. With rubbing movements, apply a foundation layer of Rubber base and add a little more base to create a smooth surface. Dry for 30 seconds.
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique).
7. Cure each nail for 30 seconds, then finally put both hands in for another 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform a surface filing if necessary.
9. Apply top coat No Sticky or Dark Story and dry for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Warning! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Please also note that even on cloudy days, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to begin to polymerize. When painting tips, we recommend keeping the working side of the UV lamp facing away from the master. If you hold the lamp on with the light facing the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Note: All documents are in the attached files!