HEYLOVE. Nail Cushion set «White», 6 pcs, set of gel paints for ombre, stamping and drawing
In the set:
1️⃣ Open the lid and remove the white protective seal
2️⃣ Use the mesh dispenser for the perfect amount of product on the sponge
(for a more intense effect, work without the mesh)
3️⃣ Secure the sponge in the holder.
4️⃣ Create a gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the nail tip for a smooth transition.
If you have applied too much product, the excess can be easily removed with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds
7️⃣ Apply a thin layer of clear base over the finished design, polymerize, then apply a thin layer of top. Sealing with a combination of base and top will prevent chipping.
Gel paint polymerization time: 1-2 minutes
Volume: 6 pcs of 2 g each
Manufacturer: TM "HEYLOVE"
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! To avoid unwanted polymerization of the material during work, testing, or shooting for content, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to cause the material to polymerize. When painting nail tips, we recommend keeping the working side of the UV lamp away from the technician. If you hold the switched-on lamp facing the technician, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
- Ukraine