HEYLOVE. Frame builder Gel, VINTAGE, 30 ml. Universal building gel

Modeling gel with a medium creamy consistency and fine shimmer, which gives the coating a deep, delicate glow. The material spreads easily, self-levels, and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort for the technician during work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Flexible in a thin layer — reduces the risk of lifting near the cuticle;
• Hard with built-in shock absorption in a 1 mm layer — holds shape, resistant to chips;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heating during polymerization is moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60–120 seconds in an LED lamp 48W;

Application:

• For sculpting on upper and lower forms;
• Restoration of shape, strengthening;
• Reconstruction using the 'sidewall' technique;
• No-file extension;

1. Prepare the nail plate mechanically (180-grit file or 100-grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it into an upper form or lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1-2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. As the final layer, apply top coat (top). Cure for 1-2 min.
10. Using a carbide bit file out the natural nail from underneath in the free edge area.
11. Carefully sand the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of an active UV lamp facing away from the master. If you hold an active lamp with its light toward the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!