HEYLOVE. Frame builder Gel, VINTAGE, 30 ml. Universal building gel

Modeling gel of medium creamy consistency with fine shimmer, which gives the coating a deep, delicate glow. The material is easy to spread, self-leveling, and helps to form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort during work for the technician.

Advantages:

• Almost no odor;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer – reduces the risk of lifting near the cuticle;
• Hard with some cushioning in a 1 mm layer – holds shape, resistant to chipping;
• Passed CPNP notification
• Without HEMA, without TPO.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heating during polymerization moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Restoration of shape, reinforcement;
• Reconstructions using the "wall" technique;
• No-filing extension;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply the dehydrator and let it dry for 30 seconds.
4. Apply the base with rubbing movements and level the surface. Cure for 30 seconds.
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or lay it into an upper form or onto a lower form (depending on the technique).
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1–2 minutes.
8. Remove the sticky layer and perform a surface file if needed.
9. Apply a final layer of top coat (top). Cure for 1-2 min.
10. Using a carbide bit file out the natural nail from underneath from the free edge area.
11. Carefully buff the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, the open bottle or brush should be kept as far away from daylight (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp turned on away from the master. If you keep the lamp turned on with the light facing the master, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.

Nota: tutti i documenti si trovano nei file allegati!