HEYLOVE. Frame builder Gel, VINTAGE, 30 ml. Universal gel for extensions

Modelling gel with a medium creamy consistency and fine shimmer that gives the coating a deep, gentle glow. The material spreads easily, self-levels and helps to form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and provides comfortable work for the nail technician.

Advantages:

• Almost odourless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• In thin layers it is elastic – reduces the risk of lifting near the cuticle;
• In a layer of 1 mm thickness it is hard with present shock-absorption – holds its shape, resistant to chipping;
• Passed CPNP notification;
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization is moderate, no higher than 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Application:

• For sculpting upper and lower forms;
• Restoration of shape, strengthening;
• Reconstruction in the 'wall' technique;
• Extension without filing;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply a dehydrator and allow to dry for 30 seconds
4. Apply the base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or lay it into an upper form or onto a lower form (depending on technique)
7. Polymerize each nail in a lamp for 30 seconds, then both hands for an additional 1–2 minutes.
8. Remove the sticky layer and perform a surface file if necessary.
9. As the final layer, apply top coat (top). Cure for 1-2 min.
10. With a carbide bur file the natural nail from below in the free edge area.
11. Carefully sand the end with a buffer to avoid damaging the surface coating.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content filming, keep an open bottle or brush as far from daylight as possible (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient to cause the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp turned away from the master. If you hold the lamp on towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Opmerking: alle documenten bevinden zich in de bijgevoegde bestanden!