HEYLOVE. Frame builder Gel, BISCOTTI, 30 ml. Universal gel for nail extension

Modeling gel with a medium creamy consistency and fine shimmer, providing the coating with a deep, delicate glow. The material spreads easily, self-levels, and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort during application.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in thin layers - reduces risk of lifting near the cuticle;
• Hard with built-in cushioning in 1 mm layers - holds shape, resistant to chips;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heat during polymerization: moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Purpose:

• For shaping upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the 'wall' technique;
• Extension without filing;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the necessary amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. As a final layer, apply top coat (top). Cure for 1-2 min.
10. With a carbide bit file out the natural nail from below in the free edge area.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand care products. Done!

Manufacturer: TM 'HEYLOVE'

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing or content creation, keep the open bottle or brush as far away as possible from daylight (especially direct sunlight). Also please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting tips, we recommend keeping the operating side of the UV lamp facing away from the master. If you hold the lamp on with the light facing the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Opmerking: alle documenten bevinden zich in de bijgevoegde bestanden!