HEYLOVE. Frame builder Gel, BISCOTTI, 30 ml. Universal gel for nail extensions

Modeling gel with a medium creamy consistency and fine shimmer, giving the coating a deep, delicate glow. The material spreads easily, self-levels, and helps create a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and flexibility, the gel holds its shape well, maintains coating stability, and provides comfort for the master during work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Flexible in a thin layer - reduces the risk of lifting near the cuticle;
• In a 1 mm thick layer, hard with shock absorption - holds shape, resistant to chipping;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization is moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Flexibility: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Application:

• For sculpting on upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the ‘wall’ technique;
• No-filing extension;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply a dehydrator and let it dry for 30 seconds
4. Apply the base with rubbing motions and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place into an upper form or onto a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. Apply as the final layer top coat (top). Cure for 1-2 minutes.
10. With a carbide bur file out the natural nail from below from the free edge area.
11. Gently sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply care products for cuticles and hand skin. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the UV lamp, while on, turned away from the master. If you keep the lamp turned on with the light towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Nota: todos los documentos están en los archivos adjuntos!