HEYLOVE. Frame builder Gel, HONEY, 30 ml. Universal building gel for nail extension

Modeling gel of medium creamy consistency with fine shimmer, which gives the coating a deep, delicate glow. The material spreads easily, self-levels and helps to form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and provides comfort for the master during application.

Benefits:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Flexible in thin layers - reduces risk of lifting near the cuticle;
• Hard with impact absorption in a 1 mm layer - holds shape, resistant to chips;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heating during polymerization is moderate, no higher than 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstructions in the 'sidewall' technique;
• No-filing extensions;

1. Prepare the nail plate mechanically (180-grit file or 100-grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply a dehydrator and let it dry for 30 seconds
4. With rubbing motions apply the base and level the surface. Cure for 30 seconds
5. Press the pump and dispense the necessary amount of material.
6. Apply Frame gel in an architectural layer or lay it into an upper form or onto a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and do a surface file if needed.
9. As the last layer apply a top coat (top). Cure for 1–2 min.
10. With a carbide bit saw out the natural nail from below in the free edge area.
11. Carefully sand the edge with a buffer so as not to damage the coating surface.
    Wipe with a damp cloth from dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Also, please note that even in cloudy weather, clouds allow a large amount of ultraviolet radiation, which is enough for the material to start polymerizing. When painting tips we recommend keeping the working side of the UV lamp that is on away from the technician. If you keep the lamp on with light toward the technician, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Nota: todos los documentos se encuentran en los archivos adjuntos!