HEYLOVE. Frame builder Gel, HONEY, 30 ml. Universal gel for extension

Modeling gel of medium creamy consistency with fine shimmer, giving the coating a deep, delicate glow. The material spreads easily, self-levels and helps to form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and ensures comfortable work for the master.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of lifting near the cuticle;
• In a 1 mm thick layer it is hard with built-in cushioning - holds its shape, resistant to chipping;
• Has passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics::

• Heating during polymerization moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Purpose:

• For modeling on upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the «bevel» technique;
• Extension without filing;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Using rubbing motions, apply base and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the necessary amount of material.
6. Apply Frame gel in an architectural layer or place into an upper form or a lower form (depending on technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1-2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. As the final layer apply finish coating (top). Dry for 1-2 min.
10. With a carbide bit file out the natural nail from underneath in the free edge area.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply care products for cuticles and hand skin. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the active UV lamp turned away from the master. If you hold the turned-on lamp with the light toward the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Nota: todos os documentos estão nos arquivos anexados!