HEYLOVE. Frame builder Gel, BISCOTTI, 30 ml. Universal nail extension gel

Medium creamy consistency modeling gel with fine shimmer, giving the coating a deep, delicate glow. The material spreads easily, self-levels, and helps create a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfortable work for the technician.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in thin layers - reduces the risk of lifting near the cuticle;
• Hard with cushioning in a 1 mm layer - holds shape, resistant to chipping;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Moderate heating during polymerization, no higher than 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Purpose:

• For sculpting on top and bottom forms;
• Shape restoration, strengthening;
• Reconstructions using the 'sidewall' technique;
• Filing-free extension;

1. Prepare the nail plate mechanically (file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and the lateral sinuses.
3. Apply a dehydrator and let it dry for 30 seconds
4. Using rubbing motions, apply the base and level the surface. Cure for 30 seconds
5. Press the pump and dispense the necessary amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. As the last layer, apply top coat (top). Cure for 1-2 min.
10. Using a carbide burr file out the natural nail from the free edge area from underneath.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: Brand "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Warning! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the UV lamp that is on facing away from the technician. If you keep the lamp on with light facing the technician, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Nota: todos os documentos estão nos arquivos anexados!