HEYLOVE. Frame builder Gel, BISCOTTI, 30 ml. Universal builder gel for nail extension

Modeling gel of medium creamy consistency with fine shimmer that gives the coating a deep, delicate glow. The material spreads easily, self-levels, and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort for the master during work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of lifting near the cuticle;
• Hard with shock absorption in a 1mm layer - holds shape, resistant to chipping;
• Has passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heat during polymerization moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Purpose:

• For sculpting upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the "wall" technique;
• Extension without filing;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place into an upper form or a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and file the surface if necessary.
9. Apply as a final layer top coat (top). Cure for 1-2 min.
10. Using a solid carbide bit file out the natural nail from the free edge area from underneath.
11. Carefully buff the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of UV radiation sufficient for the material to start polymerizing. When applying color on tips, we recommend keeping the working side of the operating UV lamp turned away from the master. If the lamp is held with its light directed toward the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Note: all documents are in the attached files!