HEYLOVE. Frame builder Gel, HONEY, 30 ml. Universal builder gel

Modeling gel with a medium creamy consistency and fine shimmer that gives the coating a deep, delicate glow. The material spreads easily, self-levels, and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel maintains its shape well, keeps the coating stable, and ensures comfort for the nail technician during work.

Advantages:

• Nearly odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer — reduces the risk of lifting near the cuticle;
• Hard with present cushioning in a 1 mm layer — holds shape, resistant to chipping;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization is moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Cure time: 60-120 seconds in a 48W LED lamp;

Application:

• For sculpting on top forms and bottom forms;
• Shape restoration, strengthening;
• Reconstructions in the
• No-file extensions;

1. Prepare the nail plate mechanically (file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or lay into an upper form or onto a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform a surface file if needed.
9. As the final layer, apply top coat (top). Cure 1-2 min.
10. Carbide drill bit file out the natural nail from under the free edge area.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp facing away from the master. If you keep the lamp on with the light towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!