HEYLOVE. Frame builder Gel, CHIC, 30 ml. Universal nail extension gel

Medium cream consistency modeling gel with fine shimmer, imparting a deep, delicate glow to the coating. The material is easily distributed, self-leveling and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel maintains its shape well, keeps coating stability and ensures comfort in the master’s work.

Benefits:

• Almost odorless;
• Medium cream consistency;
• Self-leveling;
• Does not burn during polymerization;
• Thin layer flexible - reduces risk of lifting near the cuticle;
• In a 1 mm thick layer hard with present cushioning - holds shape, chip resistant;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Flexibility: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For sculpting top and bottom forms;
• Shape restoration, strengthening;
• Reconstruction in the ‘wall’ technique;
• Extension without filing;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the area under the cuticle and side sinuses.
3. Apply a dehydrator and let it dry for 30 seconds
4. Apply the base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or lay it on an upper form or a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform a surface filing if needed.
9. Apply the final layer of top coat (top). Cure for 1-2 min.
10. With a carbide burr file out the natural nail from the free edge area from underneath.
11. Carefully smooth the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply care products for cuticles and hand skin. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also note that even in cloudy weather, clouds allow a large amount of ultraviolet radiation to pass through, which is sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp turned away from the master. If you hold the turned-on lamp with the light toward the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Note: all documents are located in attached files!