HEYLOVE. Frame builder Gel, CHIC, 30 ml. Universal gel for nail extension

Modeling gel of medium creamy consistency with fine shimmer that gives the coating a deep, delicate glow. The material spreads easily, self-levels, and helps create a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort in the master's work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• In a thin layer it is elastic - reduces the risk of peeling near the cuticle;
• In a layer 1 mm thick it is hard with present shock absorption - holds its shape, resistant to chips;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heating during polymerization is moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstructions in the
• Filing-free extension;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel with an architectural layer or lay it into an upper form or onto a lower form (depending on the technique)
7. Cure each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform surface filing if necessary.
9. As a final layer apply top coat (top). Dry for 1-2 min.
10. With a carbide cutter file out the natural nail from below from the free edge area.
11. Carefully sand the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth from dust and apply care products for cuticle and hand skin. Ready!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing or content shooting, the open bottle or brush should be kept as far away from daylight (especially direct sunlight) as possible. Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is enough for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp that is turned on away from the master. If you hold the switched-on lamp with the light towards the master, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Nota: todos los documentos estan en los archivos adjuntos!