HEYLOVE. Frame builder Gel, CHIC, 30 ml. Universal gel for extension

Modeling gel with a medium creamy consistency and fine shimmer, giving the coating a deep, soft glow. The material spreads easily, self-levels and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and ensures comfortable work for the master.

Advantages:

• Nearly odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• In a thin layer it is flexible - reduces the risk of lifting near the cuticle;
• In a 1 mm thick layer it is hard with shock absorption - holds its shape, resistant to chips;
• Passed CPNP notification
• HEMA free, TPO free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization is moderate, no higher than 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED 48W lamp;

Application:

• For sculpting upper and lower forms;
• Restoration of shape, reinforcement;
• Rebalancing in the 'sidewall' technique;
• No-fill nail extension;

1. Prepare the nail plate mechanically (180 grit file or 100 grit buffer)
2. Degrease the nails, paying attention to the area under the cuticle and lateral sinuses.
3. Apply a dehydrator and let it dry for 30 seconds
4. Apply the base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and dispense the necessary amount of material.
6. Apply Frame gel in an architectural layer or lay it into an upper form or onto a lower form (depending on technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands for an additional 1–2 minutes.
8. Remove the sticky layer and perform a surface file if needed.
9. Apply the final layer of top coat as the last layer Top Coat (Top). Cure for 1–2 min.
10. Using a carbide bit file out the natural nail from the free edge area from underneath.
11. Carefully sand the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply care products for cuticles and hand skin. Done!

Manufacturer: Trademark "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Warning! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp facing away from the nail technician. If you hold the lamp facing the technician with its light, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Nota: todos os documentos estão nos arquivos anexados!