HEYLOVE. Frame builder Gel, DREAMY, 30 ml. Universal nail extension builder gel

Modeling gel with a medium creamy consistency and fine shimmer, providing the coating with a deep, gentle shine. The material spreads easily, self-levels, and helps create a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort for the technician during work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• No burning during polymerization;
• Elastic in thin layers - reduces the risk of lifting near the cuticle;
• Hard with present amortization in a 1 mm thick layer - holds its shape, resistant to chipping;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Moderate heating during polymerization, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Purpose:

• For sculpting on tip forms and lower forms;
• Form restoration, strengthening;
• Reconstruction in the 'sidewall' technique;
• No-filing extensions;

1. Prepare the nail plate mechanically (file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the cuticle area and lateral sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place it on an upper form or on a lower form (depending on technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1-2 minutes.
8. Remove the sticky layer and perform a surface file if necessary.
9. As a final layer, apply top coat (top). Cure for 1-2 min.
10. With a carbide drill file out the natural nail from the underside in the free edge zone.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far as possible from daylight (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is enough for the material to start polymerizing. When painting tips, we recommend keeping the working side of the UV lamp that is on away from the master. If you hold the lamp on with the light facing the master, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.

Nota: todos os documentos estão nos arquivos anexados!