HEYLOVE. Frame builder Gel, DREAMY, 30 ml. Universal gel for nail extension

Modeling gel of medium creamy consistency with fine shimmer, giving the coating a deep soft glow. The material spreads easily, self-levels and helps form a smooth, even surface with minimal filing.

Thanks to the balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and ensures comfortable work for the master.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in thin layer - reduces risk of lifting near cuticle;
• Hard with present amortization in layer thickness of 1 mm - holds shape, resistant to chips;
• Passed CPNP notification
• HEMA-free, TPO-free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Characteristics:

• Heating during polymerization moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in LED lamp 48W;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstructions in the sidewall technique;
• No-file extension;

1. Prepare the nail plate mechanically (file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the cuticle area and side sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply the base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel with an architectural layer or place it on a top form or on a bottom form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform a surface filing if necessary.
9. As the last layer, apply finish coating (top). Let it cure for 1-2 min.
10. Using a carbide bur file out the natural nail from the free edge area from underneath.
11. Gently sand the end with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth to remove dust and apply cuticle and hand skin care products. Done!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Warning! To avoid unwanted polymerization of the material during work, testing, or content creation, keep the open bottle or brush as far away from daylight (especially direct sunlight) as possible. Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to begin to polymerize. When painting tips, we recommend keeping the working side of the UV lamp that is on facing away from the master. If you hold the turned-on lamp with the light towards the master, unwanted polymerization of the material on brushes and the necks of open bottles may occur.

Nota: todos los documentos están en los archivos adjuntos!