HEYLOVE. Frame builder Gel, VINTAGE, 30 ml. Universal gel for extension

Modeling gel of medium creamy consistency with fine shimmer, giving the coating a deep, delicate glow. The material spreads easily, self-levels and helps form a smooth, even surface with minimal filing.

Thanks to a balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability and ensures comfort during the master's work.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of peeling near the cuticle;
• Solid with built-in shock absorption in a layer 1 mm thick - holds shape, resistant to chipping;
• Passed CPNP notification
• HEMA free, TPO free.

Video: https://www.instagram.com/p/DfPTbmTIcKy/

Specifications:

• Heating during polymerization is moderate, not exceeding 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in a 48W LED lamp;

Purpose:

• For modeling upper and lower forms;
• Shape restoration, strengthening;
• Reconstruction using the 'edge' technique;
• Extensions without filing;

1. Prepare a nail plate mechanically (file 180 grit or buffer 100 grit)
2. Degrease nails, paying attention to the area under the cuticle and side sinuses.
3. Apply dehydrator and let it dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or lay into the top form or on the bottom form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1–2 minutes.
8. Remove the sticky layer and perform a surface file if needed.
9. As the last layer apply finish coating (top). Dry for 1-2 min.
10. With a carbide bur file out the natural nail from under the free edge area.
11. Carefully sand the edge with a buffer to avoid damaging the coating surface.
    Wipe with a damp cloth from dust and apply cuticle and hand skin care products. Ready!

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [+/-]: CI 77499, CI 77891, CI 77491.

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep an open bottle or brush as far as possible from daylight (especially direct sunlight). Also, please note that even in cloudy weather, clouds allow a large amount of ultraviolet radiation sufficient for the material to start polymerizing. When painting tips, we recommend keeping the working side of the running UV lamp away from the master. If you keep the lamp on with the light towards the master, unwanted polymerization of the material on the brushes and necks of open bottles may occur.

Nota: todos os documentos estão nos arquivos anexados!