Cart is empty
HEYLOVE. Flow base, CASUAL, 15 ml, colored base of medium-liquid consistency
Please sign in so that we can notify you about a reply
Thanks to its dense pigmentation and elasticity, the Сasual tinted base creates a perfectly even coverage after just one coat.
Shade: light lilac
Collection: EVERYDAY
Collection review at the link: https://www.instagram.com/p/DE4x8s7ICUB/
Consistency: medium, close to liquid
Hardness/Elasticity: elastic
Acidity: neutral, pH=6.5
Scent: neutral
Pigmentation: dense, covers the free edge
How to use:
- Thoroughly degrease the nail plate with phBond dehydrator.
- Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely.
- Apply a layer of clear Rubber base as a base coat and cure for 30 seconds.
- Apply one or two coats of Flow base. Cure in a UV/LED lamp for 60 seconds.
- Apply a top coat as the final layer.
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenyiphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, Cl 15985, CI 77492, Cl 77007, CI 77510, Cl 77742, Cl 77289, CI 77499, CI 77891, Cl 7700
Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Please also note that even on cloudy days, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, it is recommended to keep the working side of the turned-on UV lamp facing away from the master. If the lamp is kept turned on with the light facing the master, unwanted polymerization of the material on brushes and the necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. It does not depend on the formula or ingredients. It depends on the density (viscosity).
It's simply a law of physics, nothing else.
For example, in water, bubbles last very briefly and come out on their own.
If we take thicker liquids (honey, thick builder gel, etc.) – bubbles readily settle in these products and do not leave them as quickly as water.
It's the same with the base. If you work carelessly with the brush, sharply plunging it into the bottle, it inadvertently acts like a blender, mixing the material with air and forming bubbles. This is especially true for materials in bottles with a brush.
Therefore, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were working on developing the tint base product, we had a choice of density. We deliberately chose a medium consistency because it has advantages:
- the material does not run or flood;
- the contours are sharp without extra effort;
- the master calmly builds the architecture and has time to check it by the reflection;
- there is no need to apply a second coat to refine the architecture or camouflage the free edge.
At our production facility, we have equipment that prevents the formation of bubbles in the material at all stages – from mixing the pigment to filling the bottles.
We also warn our partners that we are against a store consultant opening a bottle to show the material to a customer. Because a consultant who is not a master does not understand that bubbles can be created with the brush without even realizing it.
Not to mention that the necks of the bottles look unsightly when they are smeared with material right up to the top.
If bubbles have appeared in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the law of physics, molecules move faster in a warm environment, and this speeds up the process.
The air will come to the surface, as it is lighter than the liquid.
Brand:
HELLO
Collection:
EVERYDAY
Country of origin:
- Ukraine
Property:
- Opaque
- Liquid
Volume:
15
Coating characteristics
Product type:
Color rubber base / Camouflage base / colored
Color
Colors:
- Фиолетовые/сиреневые