HEYLOVE. Frame builder Gel, CREAMY, 30 ml, universal builder gel, neutral beige

FRAME gel - a universal builder gel for nail extensions in 13 shades

Packaged in a jar with a pump for gel dispensing.

CREAMY - neutral beige.

Video (material overview and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Characteristics:

• for sculpting, correction, strengthening, and filing-free extension;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - flexible, while in a thick layer it holds the arch and does not deform;
• creates a durable coating resistant to chips;

How to use:

1. Buff the nail plate with a 180 grit file or 100 grit buffer.
2. Wipe with degreaser to remove dust, especially under the cuticle and sidewalls.
3. Apply dehydrator and wait 30 seconds for the moisture to evaporate.
4. Rub in a base coat of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it into an upper form or onto a lower form (depending on the technique).
7. Cure each nail for 30 seconds, then at the end place both hands in the lamp for 1-2 minutes.
8. Remove the sticky layer from Frame gel and perform surface filing if necessary.
9. Apply No Sticky or Dark Story top coat and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, an open bottle or brush should be kept as far as possible from daylight (especially direct sunlight). We also ask you to note that even in cloudy weather, clouds let through a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When coloring nail tips, we recommend keeping the working side of an operating UV lamp away from the technician. If you hold the turned-on lamp with light towards the technician, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.

Note: all documents are in the attached files!