HEYLOVE. Frame builder Gel with Pump, ROSE CLOUD, 30 ml, universal nail extension gel with pump, beige-pink

FRAME gel - universal nail extension gel in 13 shades

Packaged in a jar with a pump for dispensing the gel.

ROSE CLOUD - beige-pink.

Video (material review and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Features:

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• elastic in a thin layer, while in a thick layer it holds the arch and does not deform;
• creates a strong, chip-resistant coating;

Usage:

1. Sand the nail plate with a 180-grit file or a 100-grit buffer.
2. Wipe off dust with a degreaser, especially under the cuticle and in the side sinuses.
3. Apply a dehydrator and wait 30 seconds for it to evaporate the moisture.
4. With rubbing motions, apply a primer layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and squeeze out the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique).
7. Polymerize each nail for 30 seconds, then at the end place both hands once more for 1-2 minutes.
8. Remove the sticky layer from the Frame gel and perform a surface filing as needed.
9. Apply No Sticky or Dark Story top and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Composition (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, the open bottle or brush should be kept as far as possible from daylight (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation that is sufficient for the material to start polymerizing. When painting tips, we recommend holding the working side of the operating UV lamp away from the master. If you hold the turned-on lamp with light toward the master, unwanted polymerization of the material may occur on brushes and on the necks of open bottles.

Note: all documents are in the attached files!