HEYLOVE. Frame builder Gel with Pump, CORAL BLUSH, 30 ml, universal builder gel with pump, beige-peach

FRAME gel - universal builder gel for extension in 13 shades

Packed in a jar with a pump for dosing the gel.

CORAL BLUSH - beige-peach.

Video (material review and packaging instructions) at the link: https://www.instagram.com/reel/DDjuzN5tvVi/?igsh=YXAwcGZ1MjFmaTJl

Characteristics:

• for modeling, correction, strengthening, extension without filing;
• medium consistency, closer to liquid;
• self-leveling;
• in a thin layer - elastic, and in a thick layer it holds the arch and does not deform;
• creates a durable coating, resistant to chips;

Instructions for use:

1. Sand the nail plate with a 180 grit file or a 100 grit buffer.
2. Wipe off dust with a degreaser, especially under the cuticle and in the side pockets.
3. Apply dehydrator and wait 30 seconds for it to evaporate moisture.
4. Using rubbing motions, apply a primer layer of Rubber base and add a little more base to create a smooth surface. Cure for 30 seconds.
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place it in an upper form or on a lower form (depending on the technique)
7. Cure each nail for 30 seconds, then at the end place both hands again for 1-2 minutes.
8. Remove the sticky layer from the Frame gel and perform surface filing if necessary.
9. Apply top coat No Sticky or Dark Story and cure for 1-2 minutes.

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, HEMA, Ethyl Trimethylbenzoyl Phenylphosphinate, Hydroxycyclohexyl Phenyl Ketone, Pigments. May
Contain: Cl 77499, Cl 77891, CI 15850, Cl 45380, Cl 47005, Cl 15510

Warning! To avoid unwanted polymerization of the material during work, testing or content creation, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient to cause the material to polymerize. When painting tips, we recommend keeping the working side of the operating UV lamp away from the master. If you keep the turned-on lamp with the light facing the master, unwanted polymerization of the material on brushes and the necks of open bottles may occur.

Note: all documents are in the attached files!