HEYLOVE. Tint base, FLIRT, 15 ml, tinted base
Thanks to dense pigmentation and elasticity, the FLIRT tint base creates a perfectly even coverage after applying the first layer.
Collection: NUDE
Consistency: medium
Stiffness/Elasticity: elastic
Acidity: neutral, pH=6.7
Odor: neutral
Pigmentation: dense, covers the free edge
Application method:
-
Thoroughly degrease the nail plate using phBond dehydrator.
- Apply acid-free primer Ultrabond to the tip of the nail and wait for the liquid to dry completely.
-
Apply a layer of Rubber base as a substrate and cure for 30 seconds.
-
Apply one or two layers of Tint base. Cure in UV/LED lamp for 60 seconds.
-
As a final layer, apply a finish coating (top).
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Composition (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, the open bottle or brush should be kept as far as possible from daylight (especially from direct sunlight). We also ask you to note that even on a cloudy day, clouds let through a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp turned away from the nail tech. If the lamp is held with its light facing the nail tech, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. This does not depend on the formula or ingredients. It depends on the density (viscosity).
It's simply a law of physics, nothing else.
For example, bubbles in water do not last long and come out on their own.
If we take thicker liquids (honey, thick builder gel, etc.) – bubbles readily settle in these products and do not leave them as quickly as water.
The same goes for the base. If you work with the brush carelessly, sharply dipping it into the bottle, it inadvertently acts as a blender, mixing the material with air and creating bubbles. This is especially true for materials in bottles with a brush.
So, make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the tint base product, we had to choose the density. We deliberately chose a medium-thick consistency because it has advantages:
- the material does not run or drip;
- contours are sharp without extra effort;
- the nail tech calmly builds the architecture and has time to check it by the reflection;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
Our production has equipment that prevents the formation of bubbles in the material at all stages – from mixing the pigment to filling the bottles.
We also warn our partners that we are against a store consultant opening the bottle for a customer and showing the material. Because a consultant who is not a nail tech does not understand that they can create bubbles with the brush without even realizing it.
Not to mention that the bottle necks look unsightly when they have been soiled with material all the way to the top.
If bubbles have appeared in the material, how to fix it?
Unscrew the bottle cap, but do not remove the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse in warm water (up to the shoulders).
According to the law of physics, molecules move faster in a warm environment, and this accelerates the process.
Air will rise to the surface, as it is lighter than the liquid.
- Ukraine
- Opaque
- Розовые