You Are Cute. Bottle Gel #03, 5 ml, liquid gel

BOTTEL GEL LIQUID GEL — innovative material for strengthening, leveling, and extending nails. It's a symbiosis of polygel and base. It consists of 60–80% acrylic copolymer (the main component of polygel) and a small amount of hydroxyethyl methacrylate HEMA (approximately 20–30%), the main component of base coats. This gel can completely replace the base.

Features:

• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.
• Allowable coating thickness — 0.5 mm at the nail edge, 1 mm at the apex.
• Acid-free, medium consistency.
• Medium pigmentation, covers the free edge.
• Full polymerization takes 120 seconds.
• Suitable only for nail strengthening and nail extension.
• Good shock absorption.
• When strengthening with this gel, you need to file the natural nail.
• Requires a Rubber Base underlay.
• It can be additionally heated to make the gel thinner.

Application Method:

STRENGTHENING:

1. Removal.
2. Do not file the nail shape or leave 2 mm of length, which will be removed after leveling.
3. With a 220-grit nail file, file the top of the nail without strong pressure, raising the scales of the nail plate, or use a 100-grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep. Do two passes. Use 4 wipes (1 wipe for 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, wrap a wipe around it, and wipe everything in the cuticle area and sidewalls.
7. Use primer if desired, but if the base for the underlay has sufficient acidity, it is not needed.
8. It is best to apply the Rubber Base underlay with a flat gel brush. Motions should be rubbing. Paint all the nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the inhibition layer.
10. Level. If leveling with gel, indent from the cuticle 0.5–1 mm. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary to create thickness at the nail edge that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material at the free edge.
13. After filing, wipe off the inhibition layer and apply gel polish.
14. Apply top. Cure for 120 seconds. After curing, do not wipe anything, because the shine may be lost.

TPO FREE

Volume: 5 ml

Brand: You Are Cute

Country: Ukraine