LUNAmoon. Premium Builder Gel "La Ballerina" #09, 50 ml, modeling gel

Classic builder gel for extensions Premium – a polymer light-curing material that, due to its strength, allows significant lengthening of the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a specific wavelength.

Features:

• Acid-free.
• Has cushioning, does not crack on impact.
• Has a medium consistency.
• Has medium pigmentation, covers the free edge.
• Suitable for the 'no-filing extension' technique.
• Suitable for extension 'on top forms'.
• Does not cause burning in the lamp.
• Becomes thicker in cold and thinner in heat.
• Thixotropic – becomes thinner if you move the brush during work.
• It can be additionally heated to make the gel thinner.
• Hard at a thickness of 1 mm. If the thickness is less than 1 mm, it may flex slightly, but this does not affect wear.
• Does not shrink and holds the arch well.
• Requires a Rubber Base underlay.
• Wavelength for polymerization: 365-405 nm.
• UV/LED lamp power: 36-48W.
• Allowable coating thickness: 0.5 mm at the tip / 1 mm at the apex.
• Complete polymerization: 120 seconds.

Application Method:

REINFORCEMENT

1. Removal.
2. We do not file the nail shape or leave it 2 mm long, which we will remove after leveling.
3. With a 220 grit nail file, file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use primer at will, but if the base for the underlay has sufficient acidity, it is not needed.
8. The Rubber Base LUNAmoon underlay is best applied with a flat gel brush. Movements should be rubbing. Outline all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level with builder gel, leaving a 0.5-1 mm gap from the cuticle. Cure in the lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness is formed at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will start to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything off, as the shine may be lost.

CLASSIC EXTENSION

1. Removal
2. Shorten the nail length to 1 mm and make a round shape.
3. With a 220 grit nail file, file the top of the nail without strong pressure, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after using them.
6. Degrease the nail with Nail Prep LUNAmoon. Do two passes. Use 4 wipes (1 wipe per 5 fingers). First pass: wipe the nail surface. Second pass: take an orange stick, place a wipe on it, and wipe everything in the cuticle area and sidewalls.
7. Use LUNAmoon primer.
8. The Rubber Base LUNAmoon underlay is best applied with a flat gel brush. Movements should be rubbing. Outline all nail sidewalls and cure in the lamp for 60 seconds.
9. Wipe off sticky layer.
10. Set the form for extending the free edge of the nail.
11. Apply clear builder gel to form the artificial nail shape. Cure for 30 seconds.
12. File the free edge and give the nail the desired shape.
13. Wipe off sticky layer and excess dust.
14. Go over the areas where the file was used again with Rubber Base LUNAmoon. Cure for 30 seconds.
15. Level with builder gel, place in the lamp and apply pressure at the 10-15th second. If the gel has strong tackiness or contains glitter, apply pressure at the 20th second.
16. Cure completely in the lamp for 120 seconds.
17. Wipe off sticky layer before applying gel polish.
18. Apply top coat. Cure for 120 seconds. After curing, do not wipe anything off, as the shine may be lost.

Shelf life: 24 months. Store open for no more than 18 months.

TPO FREE