HEYLOVE. Tint base, YODA, 15 ml, tinted base
Thanks to its dense pigmentation and elasticity, the YODA tinted base creates a perfectly even coating after just the first layer.
Shade: dusty light green
Collection: FOREST
Consistency: medium
Hardness/Elasticity: elastic
Acidity: neutral, pH 6.7
Smell: neutral
Pigmentation: dense, covers the free edge
Application:
-
Thoroughly degrease the nail plate with phBond dehydrator.
- Apply acid-free Ultrabond primer to the nail tip and wait for the liquid to dry completely.
-
Apply a layer of transparent Rubber base as a base coat and cure for 30 seconds.
-
Apply one or two layers of Tint base. Cure time in UV/LED lamp 60 seconds.
-
As the final layer, apply finish coat (top).
Volume: 15 ml
Manufacturer: TM "HEYLOVE"
Country: Ukraine
Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to begin polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp away from the technician. If the lamp is held with the light facing the technician, unwanted polymerization of the material may occur on the brushes and on the necks of open bottles.
Note: all documents are in the attached files!
How to prevent bubbles in the material?Bubbles can appear in any liquid. It doesn’t depend on the formula or ingredients. It depends on density (viscosity).
It's just the law of physics, nothing else.
For example, in water, bubbles last very briefly and come out on their own.
If we take thicker liquids (honey, thick gel for extensions, etc.), bubbles readily settle in these products and don't leave them as quickly as water.
It's the same with the base. If you work carelessly with the brush, sharply plunging it into the bottle, it involuntarily acts like a blender, mixing the material with air, creating bubbles. This is especially true for materials in bottles with a brush.
Therefore, use GENTLE, careful brush movements!
Especially when the bottle is new and full.
When we were developing the tint base product, we had a choice of density. We deliberately chose a medium-thick consistency because it has advantages:
- the material doesn't run or flood;
- the contours are sharp without extra effort;
- the technician easily builds the architecture and has time to check it by the shine;
- there is no need to apply a second layer to refine the architecture or camouflage the free edge.
Our production has equipment that prevents bubble formation in the material at all stages – from mixing the pigment to bottling.
We also warn our partners that we are against store consultants opening a bottle for a customer and showing the material. Because a consultant who is not a technician doesn’t understand that bubbles can be created with a brush without even realizing it.
Not to mention that the bottle necks look unsightly when they are soiled with material up to the very top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse it in warm water (up to the shoulders).
According to the law of physics, in a warm environment molecules move faster, and this speeds up the process.
The air will come to the surface, as it is lighter than the liquid.
- Ukraine
- Opaque
- Зелёные/салатовые