Cart is empty
HEYLOVE. Tint base, TAUPE, 15 ml, tinted base
We pack and quote today
We pack tomorrow
We accept orders until 15:00 Kyiv time, Mon–Fri
Shipping is not in the price
We weigh your packed parcel and send you a photo on the scales together with the carrier's quote. Don't like it — cancel free of charge.
Worldwide, usually ~7 days
Tracking number the moment we ship. Europe — daily private couriers (PL, DE, IT, ES, FR, CH).
Pay from any country
Cards, PayPal, Apple Pay, Revolut, Paysend, Western Union, SWIFT
PayPal
Revolut
PayPal
Revolut
A manager, not a robot
WhatsApp / Telegram / Viber +380 93 595 4926
Description
\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\nDue to its dense pigmentation and elasticity, the tinted base TAUPE creates a perfectly even coverage after just one coat.
\r\nShade: dusty grayish pink
\r\nCollection: NUDE
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\nConsistency: medium
\r\nHardness/Elasticity: elastic
\r\nAcidity: neutral, pH=6.7
\r\nOdor: neutral
\r\nPigmentation: dense, covers the free edge
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\nApplication method:
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n- \r\n
- \r\n
Thoroughly degrease the nail plate using the dehydrator phBond.
\r\n \r\n - Apply acid-free primer Ultrabond to the nail tip and wait for the liquid to dry completely. \r\n
- \r\n
Apply a layer of clear Rubber base as a substrate and cure for 30 seconds.
\r\n \r\n - \r\n
Apply one or two coats of Tint base. Cure in a UV/LED lamp for 60 seconds.
\r\n \r\n - \r\n
Finally, apply a finish coat (top).
\r\n \r\n
\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
\r\n\r\n
Bubbles can appear in any liquid. It does not depend on the formula or ingredients. It depends on the density (viscosity).
It's just a law of physics, nothing else.
For example, in water, bubbles last very briefly and escape on their own.
If we take thicker liquids (honey, thick builder gel, etc.) - bubbles gladly settle in these products and do not leave them as quickly as water.
The same with base. If you work carelessly with the brush, sharply dipping it into the bottle, it inadvertently acts as a blender, mixing the material with air and forming bubbles. This is especially true for materials in bottles with a brush.
So make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the Tint base product, we had a choice of density. We deliberately chose a medium consistency because it has advantages:
- the material doesn't run or flood;
- contours are sharp without extra effort;
- the master calmly builds the architecture and has time to check it by the reflection;
- there is no need to apply a second coat to refine the architecture or camouflage the free edge.
Our production has equipment that prevents bubble formation in the material at all stages – from mixing the pigment to filling the bottles.
We also warn our partners that we are against a store consultant opening a bottle for a customer and showing the material. Because a consultant who is not a master does not understand that bubbles can be created with the brush, even without realizing it.
Not to mention that the bottle necks look unsightly when they are soiled with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse in warm water (up to the shoulders).
According to the law of physics, in a warm environment, molecules move faster, and this speeds up the process.
The air will rise to the surface, as it is lighter than the liquid.
\r\n\r\n
\r\nVolume: 15 ml
\r\nManufacturer: TM \"HEYLOVE\"
\r\nCountry: Ukraine
\r\nComposition (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenylphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, CI 15985, CI 77492, Cl 77007, Cl 77510, CI 77742, CI 77289, CI 77499, CI 77891, CI 7700
\r\nAttention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially direct sunlight). Please also note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp turned on away from the master. If you hold the turned-on lamp with the light facing the master, unwanted polymerization of the material on brushes and on the necks of open bottles may occur.
\r\nNote: all documents are in the attached files!
\r\nHow to prevent bubbles in the material?Bubbles can appear in any liquid. It does not depend on the formula or ingredients. It depends on the density (viscosity).
It's just a law of physics, nothing else.
For example, in water, bubbles last very briefly and escape on their own.
If we take thicker liquids (honey, thick builder gel, etc.) - bubbles gladly settle in these products and do not leave them as quickly as water.
The same with base. If you work carelessly with the brush, sharply dipping it into the bottle, it inadvertently acts as a blender, mixing the material with air and forming bubbles. This is especially true for materials in bottles with a brush.
So make CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.
When we were developing the Tint base product, we had a choice of density. We deliberately chose a medium consistency because it has advantages:
- the material doesn't run or flood;
- contours are sharp without extra effort;
- the master calmly builds the architecture and has time to check it by the reflection;
- there is no need to apply a second coat to refine the architecture or camouflage the free edge.
Our production has equipment that prevents bubble formation in the material at all stages – from mixing the pigment to filling the bottles.
We also warn our partners that we are against a store consultant opening a bottle for a customer and showing the material. Because a consultant who is not a master does not understand that bubbles can be created with the brush, even without realizing it.
Not to mention that the bottle necks look unsightly when they are soiled with material all the way to the top.
If bubbles appear in the material, how to fix it?
Unscrew the bottle cap, but do not pull out the brush.
Place in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and immerse in warm water (up to the shoulders).
According to the law of physics, in a warm environment, molecules move faster, and this speeds up the process.
The air will rise to the surface, as it is lighter than the liquid.
\r\n\r\n
Specifications
BrandHEYLOVE
Product typeColor rubber base / Camouflage base / colored
Volume15
CollectionNude Collection
Country of originUkraine
ColorsНюдовые/бежевые/коричневые, Фиолетовые/сиреневые
PropertyOpaque
Documents
Reviews 1
5,0