LUNAmoon x Chillax. Builder Gel "Background" #01, 30 ml
Description
Background collection By Chillax
Background gel – nude, polymer light-curing material for strengthening and extending nails, created in collaboration Chillax × LUNAmoon. Due to its strength, it allows to significantly lengthen the nail plate. It contains photoinitiators that start the polymerization process when the material is exposed to ultraviolet light of a certain wavelength.
Features:
— Acid-free.
— Has shock absorption, does not crack upon impact.
— Has medium consistency.
— Has medium pigmentation, covers the free edge.
— Suitable for the 'extension without filing' technique.
— Suitable for extension 'on top forms'.
— Does not cause burning in the lamp.
— Becomes thicker in cold, and thinner in warmth.
— Thixotropic — becomes thinner if you move the brush during work.
— It can be additionally heated to make the gel thinner.
— Hard at 1 mm thickness. If thickness is less than 1 mm, it may bend slightly, but this does not affect wear.
— Does not shrink and holds the arch well.
— Requires a Rubber Base underlayer (https://lunamoon.in.ua/catalog/bazy/prozori-ta-ukriplyuyuchi-bazy/baza-dlya-hel-laku-rubber-base).
— Wavelength for polymerization 365-405 nm.
— UV/LED lamp power 36-48W.
— Permissible coating thickness 0.5 mm at the free edge / 1 mm at the apex.
— Full polymerization 120 seconds.
Application method:
STRENGTHENING
1. Removal.
2. Do not file the nail shape or leave 2 mm in length, which we will remove after leveling.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep LUNAmoon (https://lunamoon.in.ua/catalog/dopomizhni-materialy/znezhyryuvach-dlya-nihtiv-nail-prep). Do two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Use primer optionally, but if the base coat has sufficient acidity, it is not needed.
8. Apply the Rubber Base LUNAmoon (https://lunamoon.in.ua/catalog/bazy/prozori-ta-ukriplyuyuchi-bazy/baza-dlya-hel-laku-rubber-base) best with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Level. If leveling with gel, leave a 0.5–1 mm gap from the cuticle. Cure in lamp for 60 seconds.
11. File the shape after leveling. This is necessary so that a thickness forms at the edge of the nail that will hold the free edge.
12. If the nail was thin, it may curl, so be sure to file 1 mm of the natural nail from the inside. In this case, there will be no material lifting. If the material is hard and the nail is very soft, the nail itself will begin to separate from the hard material from the free edge.
13. After filing, wipe off the sticky layer and apply gel polish.
14. Apply top coat. Cure for 120 seconds. After curing, do not wipe with anything, as the shine may be lost.
CLASSIC EXTENSION
1. Removal.
2. Shorten the nail length to 1 mm and make a round shape.
3. Using a 220 grit file, file without strong pressure on the nail from above, lifting the scales of the nail plate, or use a 100 grit buffer.
4. Do a manicure.
5. If working with removers, wash hands with soap after working with them.
6. Degrease the nail using Nail Prep LUNAmoon (https://lunamoon.in.ua/catalog/dopomizhni-materialy/znezhyryuvach-dlya-nihtiv-nail-prep). Do two approaches. Use 4 wipes for this (1 wipe per 5 fingers). First approach: wipe the nail surface. Second approach: take an orange stick, put a wipe on it and wipe everything in the cuticle area and sidewalls.
7. Use LUNAmoon primer (https://lunamoon.in.ua/search?search=%D0%BF%D1%80%D0%B0%D0%B9%D0%BC%D0%B5%D1%80).
8. Apply the Rubber Base LUNAmoon (https://lunamoon.in.ua/catalog/bazy/prozori-ta-ukriplyuyuchi-bazy/baza-dlya-hel-laku-rubber-base) best with a flat gel brush. Movements should be rubbing. Paint all nail sidewalls and cure in lamp for 60 seconds.
9. Wipe off the sticky layer.
10. Install the form for extending the free edge of the nail.
Apply clear gel to shape the artificial nail. Cure for 30 seconds.
File the free edge and give the nail the desired shape.
Wipe off the stickiness and excess dust.
Go over again with Rubber Base LUNAmoon (https://lunamoon.in.ua/catalog/bazy/prozori-ta-ukriplyuyuchi-bazy/baza-dlya-hel-laku-rubber-base) on the areas where you used the file. Cure for 30 seconds.
Level with gel, place in the lamp and press on the 10th–15th second. If the gel has strong stickiness or contains glitter, press on the 20th second.
Finish curing in the lamp for 120 seconds.
Wipe off the stickiness before applying gel polish.
Apply top coat. Cure for 120 seconds. After curing, do not wipe anything, as the shine may be lost.
INGREDIENTS: Acrylates Copolymer, Hema, Ethyl Trimethylbenzoyl Phenylphosphinate
May contain: CI 77499, CI 77891, CI 15850, CI 19140, CI 77510
Shelf life of the product: 24 months. Store opened for no more than 18 months.
TPO FREE