HEYLOVE. Flow base, RIZZ, 15 ml, colored base of medium-thin consistency

Thanks to its dense pigmentation and elasticity, the RIZZ tinted base creates a perfectly even coverage after just the first coat.

Shade: milky-peach

Collection: EVERYDAY

Collection overview at the link: https://www.instagram.com/p/DE4x8s7ICUB/

Consistency: medium, close to liquid

Hardness/elasticity: elastic

Acidity: neutral, pH=6.5

Scent: neutral

Pigmentation: dense, covers the free edge

Application method:

• Thoroughly degrease the nail plate using the phBond dehydrator.
• Apply acid-free primer Ultrabond to the tip of the nail and wait for the liquid to dry completely.
• Apply a layer of clear Rubber base as a base coat and cure for 30 seconds.
• Apply one or two coats of Flow base. Cure for 60 seconds in a UV/LED lamp.
• Apply a finish coat (top) as the final layer.

Volume: 15 ml

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Polyacrylic Acid, HEMA, Hydroxycyclohexyl Phenyl Ketone, Ethyl Trimethylbenzoyl Phenyiphosphinate, Silica. May Contain: Cl 45380, Cl 15850, Cl 77491, Cl 15985, CI 77492, Cl 77007, CI 77510, Cl 77742, Cl 77289, CI 77499, CI 77891, Cl 7700

Attention! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Please also note that even in cloudy weather, clouds let through a large amount of ultraviolet radiation, which is sufficient for the material to start polymerizing. When painting nail tips, we recommend keeping the working side of the UV lamp, while it is on, facing away from the technician. If the lamp is turned on with the light facing the technician, unwanted polymerization of the material on the brushes and on the necks of open bottles may occur.

Note: all documents are in the attached files!

How to prevent bubbles in the material?

Bubbles can appear in any liquid. It does not depend on the formula or components. It depends on the density (viscosity).
It's just a law of physics, nothing else.

For example, in water bubbles last a very short time and come out on their own.
If we take thicker liquids (honey, thick builder gel for extensions, etc.) – in these products, bubbles readily settle in and do not leave them as quickly as water.

The same goes for the base. If you work carelessly with the brush, sharply dipping it into the bottle, it inadvertently acts as a blender, mixing the material with air, forming bubbles. This is especially true for materials in bottles with a brush.

Therefore, use CAREFUL, gentle movements with the brush!
Especially when the bottle is new and full.

When we were working on the development of the tint base product, we had a choice of density. We deliberately chose a medium-thick consistency, because it has advantages:
- the material doesn't run anywhere, doesn't flood;
- contours are clear without extra effort;
- the technician calmly builds the architecture and has time to check it by the gleam;
- there is no need to apply a second coat to refine the architecture or camouflage the free edge.

At our production facility, we have equipment that prevents the formation of bubbles in the material at all stages – from mixing the pigment to filling the bottles.

We also warn our partners that we are against store consultants opening the bottle to show the material to a customer. Because a consultant who is not a technician does not understand that you can create bubbles with the brush, even without realizing it.
Not to mention that the necks of the bottles look unsightly when they get soiled with material all the way to the top.

If bubbles appear in the material, how to fix it?

Unscrew the cap of the bottle, but do not take out the brush.
Place it in a warm (but not hot!) place overnight.
Or put the bottle in a plastic bag and submerge it in warm water (up to the shoulders).

According to the law of physics, in a warm environment molecules move faster, and this speeds up the process.
The air will rise to the surface, it is lighter than the liquid.