HEYLOVE. Nail cushion «White», 2 g, gel paint for ombre, stamping and painting, white
Description
1️⃣ Open the lid and remove the white protective valve
2️⃣ Use the mesh dispenser for the perfect amount of material on the sponge
(for a more saturated effect, work without the mesh)
3️⃣ Fix the sponge in the holder.
4️⃣ Create a gradient in 2 stages:
• Apply an undertone and polymerize.
• Add colour to the tip of the nail for a smooth transition.
If you find that you have applied too much material, the excess can be easily removed with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds
7️⃣ Apply a thin layer over the finished design base, polymerize it, then apply a thin layer of top coat. Fixing with a combination of base and top coat will prevent chipping.
Polymerization time of gel paint: 1-2 minutes
Volume: 6 pcs of 2 g
Manufacturer: TM «HEYLOVE»
Country: Ukraine
1️⃣ Open the lid and remove the white protective seal.
2️⃣ Use the mesh dispenser to get the perfect amount of product on the sponge
(for a more intense effect, use without the mesh).
3️⃣ Secure the sponge in the holder.
4️⃣ Create the gradient in 2 steps:
• Apply the base shade and polymerize.
• Add color to the tip for a smooth transition.
If you’ve applied too much, simply remove the excess with a clean sponge.
6️⃣ Polymerize each layer in the lamp for 60 seconds.
7️⃣ Seal with a thin layer of base and top coat:
Apply a thin layer of clear base coat over the finished design, polymerize, then apply a thin layer of top coat. Sealing with a combination of base and top coat will prevent chipping.
Attention! To avoid unwanted material polymerization during work, testing, or content shooting, keep an open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation sufficient to polymerize the material. When painting tips, we recommend keeping the working side of the operating UV lamp facing away from the master. If you hold the switched-on lamp with the light toward the master, unwanted polymerization may occur on the brushes and on the necks of open bottles.
Note: All documents are in the attached files!
Specifications
Documents
Reviews
There are no reviews for this product yet
No posts found