HEYLOVE. Frame builder Gel, VEIL, 30 ml. Universal builder gel

Updated and improved formula FRAME GEL – a modeling gel of medium creamy consistency, presented in 13 new shades.

Veil — light peachy shade.

The material spreads easily, self-levels, and helps to form a smooth, even surface with minimal filing. Thanks to the balanced combination of strength and elasticity, the gel holds its shape well, maintains coating stability, and ensures comfort for the technician.

Please note! The difference between the two palettes in the application technique. Since FRAME GEL is used for strengthening/coating and extension, the color saturation effect will be different.

1. On nail tips with stickers – strengthening effect.

2. On upper form imprints – extension effect.

Advantages:

• Almost odorless;
• Medium creamy consistency;
• Self-leveling;
• Does not burn during polymerization;
• Elastic in a thin layer - reduces the risk of lifting near the cuticle;
• In a 1 mm thick layer, hard with cushioning - holds shape, resistant to chips;
• Passed CPNP notification;
• Without HEMA, without TPO.

Video: https://www.instagram.com/reel/DZZy1VhI5p1/?utm_source=ig_web_copy_link&igsh=MzRlODBiNWFlZA== 

Features:

• Heating during polymerization is moderate, not above 37 degrees;
• Dispersion: moderate sticky layer;
• Elasticity: moderate;
• Hardness: high;
• Polymerization: 60-120 seconds in an LED lamp 48W;

Application:

• For modeling upper and lower forms;
• Form restoration, strengthening;
• Reconstruction using the 'sidewall' technique;
• Extension without filing;

1. Prepare the nail plate mechanically (nail file 180 grit or buffer 100 grit)
2. Degrease the nails, paying attention to the area under the cuticle and lateral sinuses.
3. Apply dehydrator and let dry for 30 seconds
4. Apply base with rubbing movements and level the surface. Cure for 30 seconds
5. Press the pump and dispense the required amount of material.
6. Apply Frame gel in an architectural layer or place into an upper form or onto a lower form (depending on the technique)
7. Polymerize each nail in the lamp for 30 seconds, then both hands additionally for 1-2 minutes.
8. Remove the sticky layer and perform surface filing if needed
9. Finish the manicure by applying top coat, cure for 1-2 minutes

Manufacturer: TM "HEYLOVE"

Country: Ukraine

Ingredients (INCI): Acrylates Copolymer, Hydroxypropyl Methacrylate, Trimethylbenzoyl Ditolylphosphine Oxide, Silica.
May Contain [*/•): CI 77499, CI 77891, CI 77491

Caution! To avoid unwanted polymerization of the material during work, testing, or content shooting, keep the open bottle or brush as far away from daylight as possible (especially from direct sunlight). Also, please note that even in cloudy weather, clouds transmit a large amount of ultraviolet radiation, which is enough to cause the material to start polymerizing. When painting tips, we recommend keeping the working side of the operating UV lamp away from the technician. If you hold the turned-on lamp with the light facing the technician, unwanted polymerization of the material on brushes and necks of open bottles may occur.

Note: all documents are in the attached files!