You Are Cute. 3D Jelly Gel #01, 15 ml. Clear 3D Gel for Bulk Designs

Gel for 3D Volumetric Designs 3D Jelly Gel — decorative gel with no sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dispense and apply directly to the nail.

Features:

• Has no sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for shaping designs using molds. 
• Allows creation of various 3D elements.
• Conveniently controlled directly from the tube.
• Wavelength for curing — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Working recommendations:

For even curing, we recommend forming elements up to 2 mm thick. For larger volume, we recommend layering the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the neatest result, we recommend forming and curing the element separately, without removing it from the mold. After curing, remove the finished element, fix it on the nail with Rubber Base, and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary base according to the design technique: base coat, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or another tool, form a linear, dot, or 3D element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, allow the material to cool.
4. If necessary, cover the design with top coat, especially if glitter, pigment, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Always cover the design with top coat for more reliable adhesion and better durability. Cure for 120 seconds.

Method 2
1. Fill the mold with material and cure the element without removing it from the mold for 120 seconds.
2. Allow the material to cool, remove the finished element and secure it on the nail with Rubber Base. Cure for 120 seconds.
3. Be sure to cover the design with a top coat for a more reliable hold and better wear resistance. Cure for 120 seconds.

Ingredients: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Product images on the website may differ from the actual product)

Volume: 15 ml
Manufacturer: You Are Cute