You Are Cute. 3D Jelly Gel #01, 15 ml. Gel for 3D designs, transparent

Gel for 3D Volume Designs 3D Jelly Gel — decorative gel with no sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dose and apply directly to the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for shaping designs using molds. 
• Allows you to create various volume elements.
• Easy to control directly from the tube.
• Wavelength for curing — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Work recommendations:

For even curing, we recommend forming elements up to 2 mm thick. To create more volume, layer the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the most precise result, we recommend forming and curing the element separately without removing it from the mold. After curing, remove the finished element, fix it to the nail using Rubber Base, and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a linear, dot, or raised element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After curing, allow the material to cool down.
4. If necessary, cover the design with top coat, especially if glitter, color, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Cover the design with top coat for better fixation and improved wear resistance. Cure for 120 seconds.

Método 2
1. Encha o molde com o material e polimerize o elemento, sem removê-lo do molde, por 120 segundos.
2. Deixe o material esfriar, retire o elemento pronto e fixe-o na unha com Rubber Base. Polimerize por 120 segundos.
3. Obrigatoriamente cubra o design com top coat para uma fixação mais confiável e melhor resistência ao desgaste. Polimerize por 120 segundos.

Composição: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(As fotos do produto no site podem diferir do produto real)

Volume: 15 ml
Fabricante: You Are Cute