You Are Cute. 3D Jelly Gel #01, 15 ml. Gel for 3D designs, transparent

Gel for 3D volume designs 3D Jelly Gel — decorative gel without a sticky layer for creating relief elements and performing 3D designs on nails. Thanks to the tube format, the material is convenient to dispense and apply directly to the nail.

Features:

• Has no sticky layer.
• Suitable for making linear, dot, and relief designs;
• Suitable for forming designs using molds. 
• Allows you to create a variety of volume elements.
• Conveniently controlled directly from the tube.
• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Work recommendations:

For even polymerization, we recommend forming elements up to 2 mm thick. To create more volume, we recommend layering the material, polymerizing each layer separately. 

When working with molds, the element can be polymerized directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the most precise result, we recommend forming and polymerizing the element separately, without removing it from the mold. After polymerization, take out the finished element, fix it on the nail using Rubber Base, and additionally seal it with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or another tool, form a linear, dot, or volume element up to 2 mm thick.
3. Polymerize in a UV/LED lamp for 120 seconds. After polymerization, allow the material to cool down.
4. If necessary, cover the design with top coat, especially if rubbing powder, color, or other decorative elements have been applied to the gel surface. Polymerize the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and polymerize in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Be sure to cover the design with top coat for stronger adhesion and better durability. Polymerize for 120 seconds.

Methode 2
1. Vul de mal met materiaal en polymeer het element zonder het uit de mal te halen gedurende 120 seconden.
2. Laat het materiaal afkoelen, haal het afgewerkte element eruit en bevestig het op de nagel met Rubber Base. Polymeer gedurende 120 seconden.
3. Bedek het ontwerp altijd met een top coat voor een betere fixatie en slijtvastheid. Polymeer gedurende 120 seconden.

Samenstelling: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Productfoto's op de website kunnen afwijken van het daadwerkelijke product)

Inhoud: 15 ml
Merk: You Are Cute