You Are Cute. 3D Jelly Gel #01, 15 ml. Gel pour designs 3D, transparent

Gel for 3D designs Jelly Gel — decorative gel without sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is convenient to dose and apply directly to the nail.

Features:

• No sticky layer.
• Suitable for line, dot and raised designs;
• Suitable for shaping designs using molds. 
• Allows creating various 3D elements.
• Easily controlled directly from the tube.
• Wavelength for curing: 365-405 nm.
• UV/LED lamp power: 36-48 W.

Working recommendations:

For even curing, we recommend forming elements up to 2 mm thick. To create larger volume, we recommend layering the material, curing each layer separately. 

When working with molds, the element can be cured directly on the nail: fill the mold with material, press it against the nail and cure in the lamp.

For the neatest result, we recommend forming and curing the element separately without removing it from the mold. After curing, remove the finished element, secure it on the nail with Rubber Base and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a line, dot or 3D element up to 2 mm thick.
3. Cure in UV/LED lamp for 120 seconds. After curing, allow the material to cool.
4. If needed, cover the design with top coat, especially if rubbing, color or other decorative elements were applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Press the mold to the nail and cure in UV/LED lamp for 120 seconds. Let the material cool, then carefully remove the mold.
3. Be sure to cover the design with top coat for more reliable adhesion and better wear resistance. Cure for 120 seconds.

Méthode 2
1. Remplissez le moule avec le matériau et polymérisez l'élément sans le retirer du moule pendant 120 secondes.
2. Laissez le matériau refroidir, retirez l'élément fini et fixez-le sur l'ongle à l'aide de Rubber Base. Polymérisez pendant 120 secondes.
3. Recouvrez impérativement le design d'un top coat pour une meilleure fixation et une résistance à l'usure accrue. Polymérisez pendant 120 secondes.

Composition : Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Les photos du produit sur le site peuvent différer du produit réel)

Volume : 15 ml
Fabricant : You Are Cute