You Are Cute. 3D Jelly Gel #02, 15 ml. Gel voor 3D-designs, wit

Gel for 3D Volume Designs 3D Jelly Gel — decorative gel without sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dose and apply directly onto the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for shaping designs using molds. 
• Allows creating various 3D elements.
• Easily controlled directly from the tube.
• Wavelength for polymerization — 365–405 nm.
• Power of UV/LED lamp — 36–48 W.

Working recommendations:

For even polymerization, we recommend forming elements up to 2 mm thick. To create more volume, we recommend layering the material, polymerizing each layer separately. 

When working with molds, the element can be polymerized directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the most precise result, we recommend forming and polymerizing the element separately without removing it from the mold. After polymerization, remove the finished element, fix it to the nail using Rubber Base, and additionally seal with a top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a linear, dot, or 3D element up to 2 mm thick.
3. Cure in a UV/LED lamp for 120 seconds. After polymerization, allow the material to cool down.
4. If necessary, cover the design with a top coat, especially if glitter, color, or other decorative elements have been applied to the gel surface. Cure the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and cure in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Always cover the design with a top coat for better fixation and durability. Cure for 120 seconds.

Methode 2
1. Vul de mal met materiaal en polymeriseer het element zonder het uit de mal te halen gedurende 120 seconden.
2. Laat het materiaal afkoelen, verwijder het afgewerkte element en bevestig het op de nagel met Rubber Base. Polymeriseer gedurende 120 seconden.
3. Bedek het ontwerp altijd met top coat voor een betere hechting en duurzaamheid. Polymeriseer gedurende 120 seconden.

Samenstelling: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Productafbeeldingen op de website kunnen afwijken van het werkelijke product)

Inhoud: 15 ml
Fabrikant: You Are Cute