You Are Cute. 3D Jelly Gel #02, 15 ml. Gel for volume designs, white

Gel for 3D Volume Designs 3D Jelly Gel — decorative gel with no sticky layer for creating raised elements and performing 3D designs on nails. Thanks to the tube format, the material is easy to dose and apply directly to the nail.

Features:

• No sticky layer.
• Suitable for linear, dot, and raised designs;
• Suitable for forming designs using molds. 
• Allows creating various 3D elements.
• Easily controlled directly from the tube.
• Wavelength for polymerization — 365–405 nm.
• UV/LED lamp power — 36–48 W.

Work recommendations:

For even polymerization, we recommend forming elements up to 2 mm thick. For larger volume, we recommend layering the material, polymerizing each layer separately. 

When working with molds, the element can be polymerized directly on the nail: fill the mold with material, apply it to the nail, and cure in the lamp.

For the most precise result, we recommend forming and polymerizing the element separately without removing it from the mold. After polymerization, remove the finished element, fix it on the nail with Rubber Base, and additionally seal with top coat.

Application method

1. Perform standard nail preparation and apply the necessary coating depending on the design technique: base, gel, gel polish, or top coat.
2. Carefully squeeze the required amount of 3D Jelly Gel directly from the tube onto the nail. Using a liner or other tool, form a linear, dot, or raised element up to 2 mm thick.
3. Polymerize in a UV/LED lamp for 120 seconds. After polymerization, allow the material to cool down.
4. If necessary, cover the design with top coat, especially if powder, color, or other decorative elements have been applied to the gel surface. Polymerize the top coat for 120 seconds.

Working with molds
Method 1
1. Fill the mold with material.
2. Apply the mold to the nail and polymerize in a UV/LED lamp for 120 seconds. Allow the material to cool, then carefully remove the mold.
3. Always cover the design with top coat for stronger fixation and better durability. Polymerize for 120 seconds.

Metoda 2
1. Naplňte formu materiálem a polymerujte element, aniž byste jej vyjímal z formy, po dobu 120 sekund.
2. Nechte materiál vychladnout, vyjměte hotový element a upevněte jej na nehet pomocí Rubber Base. Polymerujte po dobu 120 sekund.
3. Nezapomeňte design přetřít top coatem pro spolehlivější fixaci a lepší odolnost při nošení. Polymerujte po dobu 120 sekund.

Složení: Acrylates Copolymer, Isobornyl Acrylate, Isobornyl Methacrylate, Silica, CI 77491, CI 77492, CI 77891, CI 77007, CI 77266, Ethyl Trimethylbenzoyl Phenylphosphinate.

TPO FREE
(Fotografie produktu na webu se mohou lišit od skutečného produktu)

Objem: 15 ml
Výrobce: You Are Cute